BUILD · FREE
Tile & Grout Calculator
Find out how many tiles and boxes you need for a floor, wall or backsplash, with waste for your layout pattern, and how much grout to buy.
See the cuts.
Then buy the tiles.
✓ Calculated in your browser ✓ No sign-up ✓ Print your layout and cut list
YOUR ROOM & TILE
YOUR LAYOUT
Look before you lay.
12 × 10 ftDrag to move the starting position. Cut pieces are numbered.
A small shift can change the cuts.
Compare narrow cuts and purchase quantities. Centering can improve the edge sizes while adding cuts.
Your cut list
Piece numbers match the drawing. Pieces sharing a stock-tile number use the same tile. Dimensions exclude the saw kerf; check each fit on site.
| Piece | Row | Cut size | Stock tile |
|---|
What is being counted?
Layout + cuts: the plan counts each physical tile position. Cutting waste is included before the extra allowance. If you enable reuse, rectangular offcuts are allocated with the entered saw kerf; pieces are never rotated.
Quantity estimate: diagonal, herringbone and very large layouts keep the area-based calculation with a pattern allowance. They do not include a cutting plan.
Grout uses the room area, tile dimensions, joint width and thickness, plus 10% allowance. Coverage varies by grout product; compare the estimate with the bag label.
HIRING? GET QUOTES
Want a local pro to quote this tile job?
No name, email or phone needed. Your job and ZIP are shown to local pros. Pros reply with their business details, and you choose who to call. Free.
The examples below describe area-based estimates. The layout above counts individual tile positions and cuts, so its purchase quantity may be higher.
How to calculate how many tiles you need
Divide the room area by the area of one tile, including the grout joint. A 12 × 10 ft room is 120 square feet, and 12 inch tiles with a 1/8 inch joint need 118. Then add waste for cuts and mistakes, which makes 130 at 10%.
How much extra tile to buy
Plan about 10% extra for a straight lay, 15% for diagonal and 18% for herringbone, because angled cuts waste more tile. Add a few percent more for rooms with alcoves or many obstacles, and for a first tiling job. Keep leftover tile for repairs, since colors vary between batches.
How much grout do I need?
Grout fills the joints, so the amount depends on tile size, joint width and tile thickness. For 100 square feet of 3/8 inch thick tile with 1/8 inch joints, the calculator gives about 7 lb for 12 × 12 tile, 5.4 lb for 12 × 24 tile and 11 lb if you widen the joints to 3/16 inch. Small tiles use far more: 1/4 inch thick 6 × 6 tile needs about 9.5 lb, and 3 × 3 mosaic about 19 lb. These figures include 10% for waste and uneven joints, and the calculator rounds up to 10 or 25 lb bags.
Frequently asked questions
How much extra tile should I buy?
Buy 10% extra for a straight pattern, about 15% for diagonal and 18% for herringbone. Rooms with many cuts or a first-time installer should add a few percent more.
How many 12x12 tiles do I need for a 100 sq ft room?
A 10 × 10 ft room with 12 × 12 inch tiles uses 100 tile positions in a straight layout, including the edge cuts with a 1/8 inch joint. With 10% spare allowance, plan for 110 tiles before whole-box rounding. An area-only estimate can be lower because it treats cut pieces as reusable area.
How do I figure out how many boxes of tile to buy?
Divide the tiles you need, with waste, by the tiles per box and round up. The box label shows the coverage in square feet, so you can also divide by that.
How do you calculate how much grout you need?
Grout volume is (tile length + tile width) ÷ (tile length × tile width) × joint width × tile thickness × floor area, all in inches. Multiply by the grout density, about 0.058 lb per cubic inch, and add 10% for waste. For 100 sq ft of 12 × 12 × 3/8 inch tile with 1/8 inch joints that is about 7 lb, so one 10 lb bag.
Does the calculator include the grout joint?
Yes. Enter the joint width, for example 1/8 or 3/16 inch, and the tile pitch includes it. Enter 0 to ignore the joint.
Is this a flooring calculator?
Yes, it works for tile flooring in any room. For wood, vinyl or laminate planks, use the same room measurements and enter the plank size, and use the pattern waste as a guide.
Can I use it for walls and backsplashes?
Yes. Enter the wall height as the width. Subtract windows or outlets only if they are large, since small cutouts are covered by waste.
How accurate is this estimate?
It is a planning estimate, not an order. Bag yields, material density and waste vary by product, supplier and job, so confirm quantities with your supplier and check local building codes before you buy or pour.
Are my measurements saved?
No. Everything is calculated in your browser. Nothing is uploaded or stored.