BUILD · FREE

Tile Installation Cost Calculator

See what it typically costs to install a tile floor per square foot, then estimate your own room: tile with waste, grout and installation labor. The prices shown are examples, so replace them with your quotes, or use the quote form below the results to ask local installers.

YOUR JOB

 

Calculated locally in your browser.

YOU NEED

–

Estimate only. Bag yields, material density and waste vary by product and supplier. Confirm quantities with your supplier and check local building codes before you buy or build.

HIRING? GET QUOTES

Want a local pro to quote this tile job?

No name, email or phone needed. Your job and ZIP are shown to local pros. Pros reply with their business details, and you choose who to call. Free.

How much does tile installation cost per square foot?

Published 2026 cost guides put the labor to install a tile floor at about $5 to $9 per square foot for most jobs, with a wider spread of roughly $3.50 to $12 for very simple or very complex work. That is about $600 to $1,080 of labor for a 12 × 10 ft room (120 sq ft). The tile itself, grout, thin-set, underlayment and removing the old floor are on top. Simple straight layouts with large tiles sit near the low end. Small rooms, diagonal or herringbone patterns, and tiled walls or showers cost more.

Stack of floor tiles

What goes into tile installation cost

A tile floor costs tile, installation labor, and the supplies that go with them: thin-set mortar, grout, underlayment and trim. This calculator prices the tile you need, including waste for your layout, and adds installation labor per square foot. Add supplies and removal of the old floor from your own quotes.

How installation labor is priced

Installers usually quote labor per square foot of floor, and the rate depends on the tile size, the pattern, the condition of the subfloor and where you live. Diagonal and herringbone layouts take longer and cost more per square foot than a straight lay. Enter a quoted rate, not an average.

Ways to lower the cost

Buy the exact box count with a sensible waste allowance, choose a straight lay over diagonal or herringbone, compare box prices and ask for a labor quote that includes surface preparation. The tile and the layout drive most of the price.

Getting installer quotes

Ask each installer to price the same job: the same room, tile size, pattern, floor prep and removal of the old floor. A quote with only a total makes comparing impossible, so ask for labor, materials and prep as separate lines. Use the quote form below the results to send your room size and tile estimate to up to two local installers. The ranges above summarize published guides checked in October 2026; local quotes decide.

Frequently asked questions

How much does it cost to install a tile floor?

Labor is typically about $5 to $9 per square foot, and the full job is the labor plus the tile, grout, thin-set, underlayment and removal of the old floor. For a 100 sq ft floor that is about $500 to $900 in labor, for 200 sq ft about $1,000 to $1,800. Enter your own room and prices above for the full estimate.

What is the tile installation cost per square foot?

Most guides give about $5 to $9 per square foot for labor, within a wider $3.50 to $12 range. Diagonal and herringbone layouts, small tiles, uneven subfloors and small rooms push the rate up. Use the labor rate from your quotes in the calculator.

How do I calculate the cost of tile installation?

Multiply the floor area by the installation rate for labor, then add the tile (boxes × price per box, including waste), grout and supplies. This page does the tile, grout quantity and labor in one step.

How much tile should I buy for the floor?

Buy 10% extra for a straight lay, about 15% for diagonal and 18% for herringbone, rounded up to whole boxes. The calculator applies the pattern you choose.

Does the estimate include grout, mortar and removal?

It estimates the grout quantity, but the price shown covers tile and labor only. Thin-set mortar, underlayment, trim and removing the old floor are extra, so add them from your quotes.

Are the prices on this page real?

No. The box price and labor rate are examples so you can see how the estimate works. Replace them with prices from your supplier and installer.

How accurate is this estimate?

It is a planning estimate, not an order. Bag yields, material density and waste vary by product, supplier and job, so confirm quantities with your supplier and check local building codes before you buy or pour.

Are my measurements saved?

No. Everything is calculated in your browser. Nothing is uploaded or stored.

Also on this topic: Tile & grout calculator, Tile square footage calculator.

Room sizes in square feet: 10x10, 10x12, 12x12, 12x14, 12x16, 14x16, 15x20, 16x20, 20x20, 20x30, 24x24, 30x40.

Common sizes: 5x8 bathroom, 8x10 bathroom, 10x10 room, 10x12 room, 12x12 room, 12x15 floor, 15x20 floor.

Quoting this job for a client? ScopePad is our free estimate and invoice app for contractors.