BUILD · FREE
Concrete Slab & Pad Cost Calculator
See what a concrete slab or pad typically costs installed per square foot, then use the calculator to price the concrete itself with bags or ready-mix. Want a pro to price your job? Use the quote form below the results.
YOU NEED
–
Estimate only. Bag yields, material density and waste vary by product and supplier. Confirm quantities with your supplier and check local building codes before you buy or build.
How much does it cost to pour a concrete slab?
Most published 2026 cost guides put a plain 4-inch residential slab at roughly $5 to $15 per square foot installed, which covers concrete, forms, labor and basic finishing. Large simple pours land near the low end. Small jobs, reinforced slabs, a difficult site or a high-cost region land near the top. A 12 × 10 ft slab (120 sq ft) is therefore about $600 to $1,800 installed, while the concrete alone is only about $260 to $520 (see the calculator above).

What changes the price of a slab
Thickness (4 inches for a patio, 5 to 6 for a garage or driveway), reinforcement (wire mesh or rebar), site prep and a gravel base, how much old concrete or grass has to be removed, the finish (broom, stamped, colored), whether a pump or a long truck delivery is needed, and the minimum-load or short-load fee on small ready-mix orders. Local labor rates move the total more than the concrete does.
Doing it yourself vs hiring a pro
Materials are a fraction of the installed price, so doing it yourself saves the labor but takes forms, tools, helpers and a tight timeline once the concrete arrives. For slabs over a cubic yard or two, or anything structural like a garage floor, most people hire a pro. Use the quote form below the results to send your measurements to up to two local contractors, and compare their written quotes line by line.
Material cost: a worked example
Material cost depends on your local price. A 12 × 10 ft slab at 4 inches needs about 1.63 cubic yards with waste. At $160 per cubic yard of ready-mix that is about $260 of concrete, while 74 bags of 80 lb at $7 each is about $520. Labor, forms, gravel, reinforcement and delivery fees are extra.
Bagged concrete vs ready-mix
Bags cost more per cubic yard but need no delivery minimum, which suits small jobs. Ready-mix is cheaper per yard but often has a minimum load and a short-load fee. The break-even is usually around 1 to 2 cubic yards.
What this estimate leaves out
The calculator covers concrete only. Add forms, gravel base, rebar or mesh, finishing tools and any pump or delivery charge. Ask your supplier for a written quote. The installed price ranges above summarize published cost guides checked in October 2026; your local quotes decide.
Frequently asked questions
How much does it cost to pour a concrete slab?
Typically about $5 to $15 per square foot installed for a plain 4-inch slab, depending on region, size, reinforcement, site prep and finish. That is about $600 to $1,800 for a 12 × 10 ft slab. The concrete alone is a fraction of that, and the calculator above prices it.
How much does a concrete pad cost?
A concrete pad usually costs about $5 to $15 per square foot installed, the same range as a slab. A 10 × 10 ft pad (100 sq ft) is about $500 to $1,500, and a 12 × 12 ft shed pad about $720 to $2,160. The concrete alone is a fraction of that; enter your size above to price it.
How much does a 10 × 10, 12 × 12 or 20 × 20 concrete slab cost?
Using $5 to $15 per square foot installed: a 10 × 10 ft slab (100 sq ft) is about $500 to $1,500, a 12 × 12 ft slab (144 sq ft) about $720 to $2,160, and a 20 × 20 ft slab (400 sq ft) about $2,000 to $6,000. Get local written quotes, because prices vary by region.
Why do concrete contractors quote different prices?
Scope differs: thickness, reinforcement, base, removal of old material, finish and delivery access. Compare quotes line by line and ask each contractor to price the same thickness, mesh or rebar and base.
How much does concrete cost per cubic yard?
Prices vary widely by region and supplier. Enter the ready-mix price you were quoted in the box above and the calculator multiplies it by your volume.
Is it cheaper to mix bags or order a truck?
For small jobs under about a cubic yard, bags avoid delivery minimums. For larger pours a truck is usually cheaper and much faster. Compare both with your local prices.
How much does a concrete floor or pad cost?
The concrete itself is volume × price. Enter your size and the ready-mix price per cubic yard, or your bag price, to see the material cost of a concrete pad or concrete floor. Labor, forms, base and finishing come on top and vary by region.
Does the calculator include labor?
No, only the concrete. Professional installation adds labor, forms, base and finishing; see the installed price per square foot above, or request local quotes with the form below the results.
How accurate is this estimate?
It is a planning estimate, not an order. Bag yields, material density and waste vary by product, supplier and job, so confirm quantities with your supplier and check local building codes before you buy or pour.
Are my measurements saved?
No. Everything is calculated in your browser. Nothing is uploaded or stored.
More free building calculators
Also on this topic: Concrete calculator, Concrete pad and slab calculator, Concrete driveway cost, Concrete patio cost, Concrete delivery cost.
Common sizes: 10x10 slab, 12x12 slab, 10x20 slab, 12x20 slab, 16x20 slab, 20x20 slab, 20x30 slab, 24x24 slab, 30x30 slab, 30x40 slab.
Quoting this job for a client? ScopePad is our free estimate and invoice app for contractors.




